Blue and white handheld water quality tester with its probe and protective cap

5-in-1 Water Quality Tester for pH, TDS, EC & Salinity

$91.68 USD
Skip to product information
Blue and white handheld water quality tester with its probe and protective cap
  • Blue and white handheld water quality tester with its probe and protective cap
  • Water quality tester display with pH, TDS, conductivity, salinity and temperature functions
  • Front and rear views of the blue and white handheld water tester
  • Water quality tester front and back with its 183 mm length and labelled controls
  • Water quality tester probe with protective cap, temperature sensor and labelled electrodes
  • One-touch mode switching on the water quality tester
  • Water quality tester taking a sample reading with examples of the backlit display
  • Example salinity and electrical conductivity readings
  • Close-up of the backlit screen and temperature readout
  • Water quality tester handling guide: do not fully submerge the meter
  • Water tester function diagram showing conductivity, pH, TDS and salinity readings
  • Water quality tester supplier diagram listing a temperature range of 0 to 60 degrees Celsius
  • Water tester cutaway showing the LR44 battery compartment and backlit display
  • Water tester reference card listing the five measurements, pH and temperature ranges, size and battery type
  • Water tester guide to calibration, taking a sample and reading the screen
5-in-1 Water Quality Tester for pH, TDS, EC & Salinity
100+ orders in the last 24h

5-in-1 Water Quality Tester for pH, TDS, EC & Salinity

$91.68 USD
Taxes included. Shipping calculated at checkout.

Check pH, total dissolved solids (TDS), electrical conductivity (EC), salinity and temperature with one handheld meter. Switch between readings using the front controls and read the results on the backlit display.

  • Five measurements for checking water samples in aquariums and hydroponic setups.
  • Backlit display, front controls and a removable probe cap.
  • Blue and white handheld meter.

Use the probe and follow the supplied calibration instructions. The readings do not determine whether water is safe to drink or identify individual contaminants.

Measurement specifications

The supplier lists pH 0.00–14.00 and temperature 0–60 °C (32–140 °F). The meter is approximately 183 mm long, and the battery compartment is marked for three LR44 cells.

Water tester reference card listing the five measurements, pH and temperature ranges, size and battery type

Water tester function diagram showing conductivity, pH, TDS and salinity readings

Water quality tester supplier diagram listing a temperature range of 0 to 60 degrees Celsius

Water tester cutaway showing the LR44 battery compartment and backlit display

Calibration and sampling

Follow the supplied calibration instructions before sampling. Keep the body of the meter above the water.

Water tester guide to calibration, taking a sample and reading the screen

Controls and probe

The front buttons switch readings and hold the display. Remove the protective cap before taking a sample.

Water quality tester front and back with its 183 mm length and labelled controls

Water quality tester probe with protective cap, temperature sensor and labelled electrodes

Reading a water sample

Use the backlit screen to check the selected measurement. Follow the supplied calibration and immersion instructions.

Water quality tester taking a sample reading with examples of the backlit display

Water quality tester handling guide: do not fully submerge the meter
Free US shipping. Arrives in 5–9 days.

Related products